Month: April 2018

Purchasing Refurbished Equipment Over New

Running a business of any kind can be an expensive endeavor, especially when it comes to companies offering any kind of manufacturing.  Manufacturing equipment has a number of pieces that are constantly in motion which leads to components needing to be replaced and maintained frequently.  One way to stay within a budget while purchasing and maintaining equipment is to look into refurbished products.   Purchasing and using refurbished equipment and replacement parts can save upwards of sixty percent when compared to new.  The best part, it is as equally as reliable especially with regular maintenance.

Pros of Purchasing Refurbished

Low Upfront Costs:

When purchasing reconditioned equipment and reconditioned parts business’s can save a great deal of money.  Usually the cost of equipment, in any business, is the most expensive aspect of a new business venture.  You can start-up a new endeavor at a fraction of the cost without putting all of your money into equipment and leaving yourself without a financial cushion.

Overall Value:

Purchasing equipment that has been reconditioned, especially when it comes from a reputable source with proven knowledge and experience.  When equipment is well maintained, no matter if it was brand new or purchased refurbished, it will function for years.

Wear and Tear:

The biggest benefit of purchasing refurbished equipment is that the known wear and tear on the equipment can be addressed when it is reconditioned.  If we know that an axel always fails after 4 hours of constant use, then the issue can be addressed during the refurbishment process.  Although the exterior of reconditioned equipment can show wear and tear the internal aspects will be even better than new.

There are a number of reasons that purchasing refurbished electrical components and equipment makes sense for your business.    Reconditioned components allow you to save money without sacrificing quality.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at  To contact one of our product reconditioning specialists, call 877.844.5514 today.


Dispelling Myths About Reconditioned Electrical Components

Many businesses and manufacturing facilities must purchase equipment and parts for maintenance & repairs.  One of the key goals with purchasing equipment and parts is that they will serve them for the longest possible amount of time at a reasonable and affordable price.  Refurbished machinery and reconditioned parts can be a great alternative for all business owners, especially those just starting out and are working within a budget.  There are certain myths surrounding reconditioned components, especially electrical, that can deter business owners from making a purchase even when it’s the most logical option.

Below we will look at these myths and share advice on how to make a wise investment when purchasing reconditioned electrical components and refurbished machinery for your business.

  • Myth 1: Reconditioned electronics are slow and operate poorly in comparison to new components.

The truth is that how well a refurbished electrical component operates today has little to do with how new it is.  It does however, boil down to the quality of reconditioning, maintenance, and use.  New electrical components operate based on how they were constructed, and the software used to create them.

  • Myth 2: Reconditioned electrical components are junk.

Electrical components are termed as junk if they are no longer being used. However, once an old piece of electronic equipment is refurbished, it can work better than a new piece of equipment.  When reconditioning the piece issues that have been exposed over time can be addressed.  If one part is always breaking on the component, then when it is refurbished that element can be fixed properly to avoid an issue later down the road.

  • Myth 3: Refurbished gadgets and used devices are the same thing.

A used device is one that has been used and is experiencing wear and tear whereas reconditioned gadgets are those that are taken, dismantled and given a new lease on life.  This means that it is rid of issues and malfunctions that could affect how it functions.

  • Myth 4: Reconditioned electrical components have a shorter lifespan.

Authorized refurbishing companies make significant investments on their reconditioned electrical components and as such, it is to their benefit if the refurbished equipment works for the longest time possible. So just because the electrical equipment is refurbished does not mean that it will not serve you for a long time in fact many times the exact opposite is the case.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at  To contact one of our product reconditioning specialists, call 877.844.5514 today.


Listen to Your Circuit Breaker

Your circuit breaker is one of the most important safety systems in your home. It detects when there is too much electrical current running through the circuit and cuts power until the problem is fixed. If your home didn’t have a circuit breaker, electricity would be too dangerous to use in a house as the risk of potential fires, injury or death would be too high.

How do circuit breakers work?

When electricity comes into your home from the grid, it enters through a circuit breaker. From there it is divided into many circuits which lead to different areas of your home. Each circuit is protected by it’s own breaker. Each circuit in your home is designed to take on a certain load. For example, the circuit that powers the kitchen and all it’s many appliances will have a greater capacity than the circuit that powers the bedrooms. Learn how to determine the amperage of a circuit breaker.

Your electrical system, including the wire, wire insulation and the breaker, all have limits. If too much electrical current is running through a circuit, it can cause bad things to happen. The wire will start to heat up and the insulation around the while can melt. If it melts than the current is now loose in the wall and that’s how fires start. That is why you need a circuit breaker to stop the current before there is any danger.

Common reasons the circuit breaker trips:

Circuit overload: The most common reason why your breaker will trip is because the circuit is overloaded. That means you are running too many things off the same circuit. You’ll have to move some of those appliances or devices to another circuit in the home or make sure you’re not using them all at once to reduce the electrical load.

If you’ve redistributed the devices and appliances, it might be overloading because a certain appliance is overheating. Try unplugging your devices one at a time and see if that makes the difference. If not, contact Renovationfinds best electricians in Calgary to take a look and remedy the situation.

Short circuit: This is when a hot wire touches another hot wire or a neutral wire inside one of your receptacles. When they touch, it causes a lot of current to flow, creating more heat than the circuit can carry. The safety feature is shutting down the circuit. Short circuits are very dangerous as they are a potential fire hazard. Check your switches and outlets for any black or brown marks or for the smell of burning. If you find signs of a short circuit, contact an electrician immediately.

Ground fault: A ground fault is when a hot wire touches the copper ground wire on the side of a metal outlet box that is connected to that ground wire. You can detect a ground fault by looking for brown or black burn marks and the smell of burning.

In conclusion, if our circuit breaker continues to trip you should consider it a warning sign that something is wrong with your electrical system. Do not put this home repair off. Contact a certified electrician to fix the problem before it starts a fire or injures someone in your home.

Original Source:

Original Date: Mar 7 2018

Written by: Simon Barrett